$23.10
1 x DANGER – TOXIC FUMES
1 x DANGER – RISK OF BATTERY EXPLOSION
1 x RESTRICTED ACCESS – AUTHORIZED PERSONNEL ONLY
1 x BATTERY SYSTEM SHORT CIRCUIT CURRENT – HAZARDOUS D.C. VOLTAGE
2 x Small red supplementary battery warning labels
1 x PROTECTIVE CLOTHING MUST BE WORN
1 x FACE SHIELD MUST BE WORN
1 x ELECTROLYTE BURNS
2 x ES UN: 3480 circular battery hazard identification markers
2 x WARNING – MULTIPLE BATTERY SUPPLIES | TURN OFF ALL BATTERY D.C. ISOLATORS TO ISOLATE EQUIPMENT
2 x WARNING – BATTERY SYSTEM D.C. ISOLATORS DO NOT DE-ENERGISE THE BATTERY BANK AND BATTERY CABLINGS
2 x WARNING – MULTIPLE SUPPLIES | ISOLATE ALL SUPPLIES BEFORE WORKING ON THIS SWITCHBOARD / BATTERY ENCLOSURE
2 x WARNING – DO NOT DISCONNECT UNDER LOAD
2 x WARNING – HAZARDOUS D.C. VOLTAGE (battery DC high voltage warning)
1 x MAIN BATTERY ISOLATOR
1 x BATTERY D.C. ISOLATOR
1 x BATTERY STRING DISCONNECTION POINT
1 x SHUTDOWN PROCEDURE
2 x MULTIPLE BATTERY SUPPLIES – BLANK DATA TAGS (for Max Short Circuit Current / Max D.C. Voltage recording)
2 x BATTERY SUPPLY – BLANK DATA TAGS (for Max Short Circuit Current / Max D.C. Voltage recording)
1 x BATTERY SYSTEM D.C. ISOLATOR
1 x BATTERY LOCATION
1 x Ceiling / Wall Cable Warning
1 x IN THE EVENT OF LIQUID DETECTED IN THE BUND
| Item | Specification |
|---|---|
| Material | Vinyl |
| Quantity per Kit | 33 labels / kit |
| Application | Facility Identification, Safety Identification |
| Indoor or Outdoor Use | Outdoor Use |
| Service Temperature Range °F | -40 °F - 180 °F |
| Compatible Surface Types | Cold, Curved, General |
| Length | Width | Height | |
| Unpacked Dimension | 200mm | 210mm | 26mm |
All labels comply with Australian battery safety regulations. Please affix all labels to the appropriate compliant locations according to local installation regulations.
1. These battery labels are designed for use with residential and commercial battery energy storage system (BESS) installations only.
2.Label performance and durability depend on proper surface preparation, correct application methods, and environmental conditions.
3.Installation should be carried out by qualified personnel in accordance with applicable local electrical codes, regulations, and industry standards.
4.The manufacturer is not responsible for any damage, injury, or non-compliance resulting from improper installation, misuse, modification, or unauthorized application of the labels.
5.Exposure to prolonged UV radiation, extreme temperatures, moisture, chemicals, or harsh environmental conditions may affect the appearance and service life of the labels over time.
6.Labels should be inspected periodically and replaced if damaged, faded, obscured, or no longer legible to ensure continued safety and compliance.
7.This product is intended to assist with equipment identification and safety communication and does not replace required safety procedures, documentation, or professional advice.
the relevant Australian standards that include, but are not limited to:
» AS/NZS 3000
» AS/NZS 5139
» AS/NZS 4777.1
» AS/NZS 5033
Smarter, cleaner and more efficient systems for modern homes
